We have a production capacity of about 500 KL per month in single shift with a working area of about 25000 Sq ft. spread over in 3 acres (about 54 grounds of land). We are classified under "Small Scale Sector".
We are having calibrated Storage Tanks, a full fledged Processing Plant, blending facilities, exclusive Grease Processing Plant using Thermax Thermic Fluid Heating System with fully automatic controls, and filtration process using "Sharples" Super Centrifuges and Micron Filtration System.
| NAMES OF INSTRUMENTS | TEST PARAMETERS & TEST METHODS |
|---|---|
| CLOUD & POUR POINT APPARATUS | For determination of Cloud & Pour Point(ASTM D 2500 & ASTM D 97) |
| SALT SPRAY CHAMBER | For evaluating the Rust Preventive properties of metal preservatives under specified conditions. |
| HUMIDITY CABINET | (ASTM B 117 & ASTM D 1748) |
| KARL FISCHER TITRATION APPARATUS – AUTOMATIC | For Determination of moisture in ppm levels. (ASTM D 1744) |
| BOMB CALORIMETER | For determination of Sulphur and Chlorine in the Oils.(ASTM D 129 and ASTM D 808) |
| POTENTIOMETRIC TITRATION APPARATUS | For determination of Total Base No. and Total Acid Number.(ASTM D 2896, ASTM D 664) |
| RUST PREVENTIVE TEST APPARATUS | To evaluate the Rust Preventive ability of Hydraulic and other Oils.(ASTM D 665 A and 665 B) |
| OXIDATION STABILITY APPARATUS | To evaluate the tendency of mineral Lubricating Oil to oxidise. (IP 306) |
| pH METER | For accurate determinationof pH. |
| SOPHISTICATED ELECTRONIC ANALYTICAL BALANCE | For very accurate measurement of weights. |
Besides, we have the required Apparatus/Instruments and facilities for complete inspection of all parameters of Lubricants, as detailed below. Test Facilities are regularly upgraded with required Instruments/Equipments
| Test Parameters | Test Method |
|---|---|
| Specific Gravity by Hydrometer | ASTM D 1298 |
| Aniline Point | ASTM D 611 |
| Acid Number | ASTM D 974 |
| Base Number | ASTM D 974 |
| Initial Boiling Point & Final Boiling Point | ASTM D 86 |
| Flash Point by C.O.C. | ASTM D 92 |
| Flash Point by P.M.C.C. | ASTM D 93 |
| Colour | ASTM D 1500 |
| Melting Point | ASTM D 87 &ASTM D 127 |
| Dropping Point of Greases | ASTM D 566 |
| Cone Penetration of Greases | ASTM D 217 |
| Copper Corrosion | ASTM D 130 |
| Sulphated Ash | ASTM D 874 |
| Saponification Number | ASTM D 94 |
| Cast Iron Corrosion Test | IS 1115 &IP 287 |
| Redwood Viscosity No. 1 & 2 | IS 8891 |
| Pour Point | ASTM D 97 |
| Cloud Point | ASTM D 2500 |
