|
|
MAHATHOL
NC, NC-22 & NC 32 |
|
Neat/Straight
Cutting Oil - Non-Staining Inactive Type |
|
MAHATHOL
NC is an inactive sulphurised cutting
oil blended from specially selected high viscosity
Index base stocks having oxidation and chemical
stability.Chlorine and sulphurised fats are incorporated
to provide Anti-weld extreme pressure and oiliness
characteristics to these Oils.
MAHATHOL NC protects the tool
life and enables the use of these Oils for extreme
pressure, low / moderate temperature cutting operations
where feed rates are high but operative speed
is low.
MAHATHOL NC provides excellent
performance in all machining operations on non-ferrous
metals and can also be used for machining of ferrous
metals where the severity of operation is not
high. This Oil is recommended for Gear hobbing,
screw cutting, tapping, milling, reaming etc.,
and they do not discolour the components.
MAHATHOL NC meets IS:3065:1985
(re-affirmed 1990) Type III Grade II specifications.
|
|
|
|
|
|
MAHATHOL
HONE 7 |
|
|
NEAT HONING
OIL |
|
|
MAHATHOL
HONE 7 is a low viscosity honing Oil
with excellent Lubricity characterestics and contains
carefully selected anti-wear and anti-rust additives.
It has the extra fluidity to ensure quick and
through flushing activities ensuring very good
surface finish and gives long life to the honing
stones.
MAHATHOL HONE 7 can also be used
for other operations such as turning, drilling
and tapping of aluminium alloys and also for certain
machining operations of ferrous, non-ferrous metals
and copper alloys. |
|
|
|
|
|
MAHATHOL
DRALA 15 |
|
|
WIRE
DRAWING OIL FOR ALUMINIUM |
|
|
MAHATHOL
DRALA-15 is a stable, non-staining refined
petroleum base oil blended with fatty oils to
impart good wetting characteristics. This Oil
has good cooling ability and is recommended for
use in wire drawing operations. |
|
|
|
|
|
MAHATHOL
DRALA 66 |
|
|
WIRE DRAWING & FORGING OIL |
|
|
MAHATHOL
DRALA 66 is a thick viscous dark coloured mineral
oil incorporated with special additives to withstand
high temperatures encountered in the deep drawing
and die forging operations. These Oils have excellent
oxidation stability and die cooling effect. They
also have Extreme Pressure additives and anti-wear
additives for their effective performance.
MAHATHOL DRALA 66 is recommended for deep drawing
and forging operations steel, ferrous, nickel
metals, tubes and their alloys. This can be applied
by spray. This enhances the die life and ensures
sticky free operations in reduction or final polish.
|
|
|
|
|
|
MAHATHOL
TEST OIL |
|
|
Neat / Straight Cutting Oil - Coolant
type |
|
|
MAHATHOL
TEST OIL is a neat / straight cutting
Oil. It also serves as a coolant. This Oil finds
extensive use in aluminium alloys grinding, polishing
and for honing operations of steel alloys. This
Oil being of low viscosity its swift flow cleans
the components of the other metal particles during
final polish leaving behind a thin film of oil
which acts as a rust preventive.
MAHATHOL TEST OIL has anti-rust
additives along with anti-oxidants and deformers
incorporated in it. Thus, this oil becomes versatile
in its applications. |
|
|
|
|
|
MAHATHOL
NC 14-S |
|
|
Neat / Straight
Cutting Oil Staining Active Type |
|
|
MAHATHOL NC 14-S
is a low viscosity cutting oil with chlorine, active
sulphur and extreme pressure additives, imparting
marked antiweld properties which help machining
of intricate shapes with high precision. Being a
low viscosity oil, it has excellent cooling and
swarf removal characteristics.
MAHATHOL NC 14-S is recommended
for difficult machining operations of touch steels
in automatic lathes, screw cutting machines where
pressurised coolant system is employed for ferrous,
ferrous alloys and stainless steel. Not recommended
for non-ferrous metals of yellow type as they are
liable to stain.
MAHATHOL NC 14-S is also suitable
for certain Honing operations. |
|
|
|
|
|
MAHATHOL
NC 32-S |
|
|
Neat/Straight Cutting
Oil - Staining Active Type |
|
|
MAHATHOL
NC 32-S is a medium viscosity dark brown
Oil containing Sulphurised fatty materials, free
active sulphur and chlorine along with extreme
pressure, oiliness and anti corrosive additives.
This Oil therefore provides better surface finish,
superior metal wettability and better cooling
in increased severity operational conditions.
They also provide longer cutting tool life over
a wide range of operating temperatures.
MAHATHOL NC 32-S is recommended
for severe cutting and machining operations of
high tensile stainless steel as well as nickel
chromium alloys on automatics, gear cutting, hobbing,
drilling, reaming and thread cutting machines.
MAHATHOL NC 32-S is not recommended
for use on non-ferrous metals or yellow metals
which they are liable to stain. |
|
|
|
|
|
MAHATHOL
SOLUCUT 25 |
|
|
GENERAL PURPOSE
EMULSIFIABLE WATER SOLUBLE CUTTING OIL
|
|
|
MAHATHOL
SOLUCUT 25 is a water soluble cutting
oil which forms a milky emulsion and contain rust
inhibitor to impart anti-rust, anti-corrosive
properties and a biocide to prevent bacterial
growth in the emulsion.
MAHATHOL SOLUCUT 25 gives excellent
tool life and surface finish and minimises tool
wear. This Oil also gives good cooling and lubricating
properties. Recommended for a variety of cutting
operations on ferrous and non-ferrous metals.
Mixing Ratio: Oil to water 1:20. Always oil must
be added to water with continuous stirring. It
does not decompose chemically, does not give objectionable
odour and does not cause de-colourisation or staining.
This oil does not affect the skin of the operators.
MAHATHOL SOLUCUT 25 meets IS
1115-1986(Reaffirmed 1991) specifications. Soluble
Cutting Oils that can work with very high ppm
level hard water (over 1000 ppm) and oils which
can work in1:40 ratio are also available. |
|
|
|
|
|
MAHATHOL
DRALA 44 |
|
|
EMULSIFIABLE PASTE
- DEEP DRAWING |
|
|
MAHATHOL DRALA
44 is an emulsifiable cream or white coloured
paste non-staining. These are formulated by blending
of refined petroleum oil with soap and fatty materials.
The additives incorporated improve the wetting characteristics
and impart film strength required for heavy drawings.
It is also useful in deep drawing of metal sheets.
They have good cooling ability and recommended for
Aluminium, Carbon Alloy steels wire and Tube drawing.
|
|
|
|
|
|
MAHATHOL
DRALA 22 |
|
|
EMULSIFIABLE PASTE - DEEP DRAWING |
|
|
MAHATHOL
DRALA-22 is an emulsifiable, cream coloured
paste non staining. These are formulated by blending
of refined petroleum oil with fatty oil and soap
formed and this improves the wetting characteristics.
It consists of inert fillers which impart film
strength required for heavy drawings. They have
good cooling abililty and recommended for Carbon
Alloy steels wire and Tube drawing.
|